Product catalog
- HM10 High - accuracy Pressure Sensor
- HM20 General - type Pressure Transducer Description
- HM22 High - accuracy Pressure Transducer
- HM23 Special Pressure Transducer for Air Conditioner, Refrigerating and Compressor
- HM23Y Special Pressure Transducer for Oilfield and Mining Well
- HM24 Economical Pressure Sensor and Transducer
- HM25 Industrial - type Pressure Transducer
- HM26 Ceramic Capacitor Pressure Transducer
- HM27 Vacuum / Absolute Pressure Transducer
- HM28 Sapphire Pressure Transducer
- HM29 Digital ? Intellectual Pressure / Differential Pressure Transducer
- HM50 Anti - corrosive Pressure Transducer
- HM60 Anti - explosive Pressure Transducer
- HM70 Hygienic Flat - membrane Pressure Transducer
- HM80 High - temperature Pressure Transducer
- HM90 High - frequency Dynamic Pressure Transducer
- HM91 Micro Pressure Sensor and Transducer
Contact Us
南京宏沐科技有限公司
銷售部地址：南京市高鐵南站南廣場
電話：400-063-9658
手機(jī)：18951963348同微信號
傳真：025-52150140
郵箱：njhongmu@hmsensor.com
HM22 High - accuracy Pressure Transducer
Description
HM22 High - accuracy pressure transducer is a new pressure transducer jointly developed, researched, and produced by us and German HELM Company. HM22 High - accuracy pressure transducer is designed with Germany made high–accuracy force–sensitive chip as a central sensing and measuring element, using such new high technology as temperature automatic compensation and normalized circuit commissioning etc. to greatly enhance overall accuracy of the product. This product is designed with advanced technology, superior performance, reliable quality, and small dimension, which may widely be used for such scientific research and production fields as airspace and aerospace, petroleum, chemical, metallurgical and electric power, building material, hydrographic and geographic, medical, protection of environment etc. It may realize high–accuracy measurement of fluid pressure and liquid level.
Features of Product
☆ Designed with Germany made high–accuracy force–sensitive chip as a central sensing and measuring element, with a accuracy up to 0.1% FS
☆ Designed with sensor temperature automatic compensation and normalized circuit commissioning to enhance temperature stability indicator up to 0.1% FS / ℃.
☆ May measure corrosive and easily crystalline medium under special requirements
☆ Designed with fully enclosed structure, all structural members made of stainless steel, which may be used in the open air for a long time.
☆ May be used for the site with online temperature measuring for a long time and without calibration.
☆ May be used for hazardous site, with intrinsically safe type Ex ia II CT5
☆ Structural diversification, design may be customized at the customer’s special requirements.
Application of Product
Details
Measuring range | -100KPa ～ 0 ～ 5KPa … 100MPa | |
Permissible over pressure | Two times of full–scale pressure （where 1.1 times of full–scale pressure for the 100MPa product. | |
Type of pressure | Gauge pressure or absolute pressure | |
Medium to be measured | The gas or liquid compatible with 316 stainless steel , | |
Overall accuracy | ± 0.1% FS | ± 0.25% FS |
Long-term stability | Typical: ± 0.1% FS / year | Maximum: ± 0.2% FS / year |
Zero point temperature drifting | Typical: ± 0.01% FS / ℃ | Maximum: ± 0.15% FS / ℃ |
Sensitivity temperature drifting | Typical: ± 0.01% FS / ℃ | Maximum: ± 0.15% FS / ℃ |
Working temperature | -20～85℃ | |
Compensating temperature | -20～60℃ | |
Ambient temperature | -40～85℃ | |
Range of power supplying | 12 ~ 36V DC( generally 24V DC) | |
Signal output | 4～20mA / 1-5V DC / 0～5V DC / 0.5～4.5V DC | |
Load resistance | ≤(U - 12) / 0.02Ω | |
Enclosure Protection degree | Plug type (IP65); cable type (IP67) | |
Safe explosion–proof | Ex ia II CT5 | |
Tolerance of vibration | ≤ ± 0.01% FS(Axles X, Y, and Z, 200Hz / g) | |
Response time | ≤2ms | |
Thermal lagging | ± 0.1% FS (typical) | |
Insulation resistance | 100MΩ， 500V DC | |
Weight | Approx. 250g | |
Product selection
HM22 | High - accuracy Pressure Transducer |
| Guideline of Selection | High - accuracy Pressure Transducer | ||||||||||
| Type of pressure | Gauge pressure (G, may not be indicated); absolute pressure (A) | ||||||||||||
|
| Range | Measuring Range | |||||||||||
|
| 0 ~ X KPa or 0 ~ X KPa | ||||||||||||
|
|
|
|
| Code | Overall accuracy (linear + repeatability + lagging) | ||||||||
|
|
|
|
| 2 | ± 0.25% FS | ||||||||
|
|
|
|
| 3 | ± 0.1% FS | ||||||||
|
|
|
|
|
|
| Code | Signal Output | ||||||
|
|
|
|
|
|
| A1 | 4 ~ 20mA | ||||||
|
|
|
|
|
|
| V1 | 1 ~ 5V DC | ||||||
|
|
|
|
|
|
| V2 | 0 ~ 5V DC | ||||||
|
|
|
|
|
|
| V3 | 0.5 ~ 4.5V DC | ||||||
|
|
|
|
|
|
|
|
| Code | Additional functions | ||||
|
|
|
|
|
|
|
|
| F1 | M20 x 1.5 external thread | ||||
|
|
|
|
|
|
|
|
| F2 | G 1 / 4 external thread | ||||
|
|
|
|
|
|
|
|
| F0 | Special | ||||
|
|
|
|
|
|
|
|
| W1 | Cable type (IP67, 2m) | ||||
|
|
|
|
|
|
|
|
| W2 | Socket type (IP65, DIN3650) | ||||
|
|
|
|
|
|
|
|
| P | Flushed membrane type | ||||
|
|
|
|
|
|
|
|
| E | Intrinsically safe explosion - proof type Ex ia II CT5 | ||||
|
|
|
|
|
|
|
|
|
|
|
| |||
HM22 ( 0 ~ 10KPa) |
|
| — 3 | — A1 | — F1 | — W2 High - accuracy Pressure Transducer | ||||||||
Tips of Selection
- The medium to be measured shall be compatible with the material contacting with the product.
- The code E, an additional functional code for selection, and intrinsically safe explosion-proof Ex ia II CT5 must be power supplied via safety barrier.
- Please contact us in case of the other special requirements and clearly indicate them when placing an order.
